Can consumers embrace product packaging that looks dull, or somewhat imperfect, in exchange for packaging that is good for the environment?
Check out this article on Greener Package.com about a new package disrupting the detergent aisle. It has a molded-pulp outer shell made from recycled cardboard and old newspapers, with an inner film pouch–both parts can easily be recycled. Read on:
Ecologic Brands has found a winning application for its multi-component molded-pulp package in Seventh Generation’s new 4X concentrated brand of liquid laundry detergent. The product has been on shelf for just 12 weeks (at presstime) and is already the number-three top-selling detergent in its category of 150 SKUs. The package was also a winner with the 2011 Greener Package Awards judges, who rewarded it with an Environmental Impact award in the Non FDA-Regulated Products category.
The Seventh Generation container consists of a molded-pulp outer shell made from 70% recycled cardboard (OCC) and 30% old newspapers (ONP) that can be recycled up to seven times. The material, without the paper label, has been certified through the Biodegradable Products Institute as being compostable per ASTM 6868. The package’s inner film pouch with spout has been constructed of polyethylene only, making it suitable for recycling with plastic grocery bags in retailer drop-off bins from Trex. When compared with a rigid plastic container, the pouch reduces plastic use by 75%, Ecologic informs. And, because the shells can be nested and the pouch can be transported flat to Seventh Generation, one truckload of the packaging materials equals nine truckloads of rigid plastic containers. Lastly, the package closure, as with most traditional laundry containers, is made from polypropylene, and is recyclable through Preserve’s Gimme 5 recycling program, found in Whole Foods Market stores. The result: A lighter-weight package that easily fits into the existing recycling stream.
Not that Seventh Generation is any newcomer to sustainable packaging advancements. At 80%, the company boasts the largest content of post-consumer recycled high-density polyethylene in its rigid laundry detergent containers. “We were reluctant at first to look at the molded-pulp bottle, because we had worked so hard at recycled HDPE,” says Peter Swaine, Seventh Generation’s director of packaging development. “But the reality is that only 29 percent of HDPE is recycled.”
Swaine attributes the low number to several factors, including lack of consumer education, confusion surrounding the SPI codes for plastics, and the lack of recycling in many U.S. municipalities.
With the molded-pulp bottle, consumers immediately understand the environmental proposition of the package. And, the likelihood of the molded-pulp shell being recycled is much greater, as OCC is recycled at a rate of 82% and ONP at 88%. “Recycled-content HDPE bottles are industry-leading,” says Swaine, “but it’s hard to tell the story because they look so much like traditional bottles. The new bottle is completely unique.”
As Ecologic founder and CEO Julie Corbett explains, part of that unique appearance also comes from the challenges associated with using recycled paper materials, which often have a large variance in the quality and origins of the feedstock. “Both these factors will have an effect on the color and outside appearance of the shell,” she says. “For example, small spots or flecks might be visible on the outside and inside of the shell.”
“If we want to continue to make products from recycled materials, this is something consumers will have to overcome. Our bottle’s general likeability and design will help consumers better understand that the beauty of a package is not only about the outside appearance, but also about the origins of materials.”
One current package-manufacturing drawback of the shell versus injection molding of rigid plastics is that the molded-pulp packaging requires the application of heat longer than required for plastic. Corbett assures that technology is quickly advancing to solve this issue. “The direction is the right direction, and this is an industry that has taken on a new life, but it’s kind of at its infancy in terms of infrastructure.”
Corbett reports that future projects in the works for Ecologic include the development of a 64-oz stock container, as well as other stock sizes, and “custom bottles for many other customers for liquids, dry ingredients, consumables, and non-consumable products.”
Says Greener Package Awards judge Jack DiMartino of Stonyfield Farms, “I love everything about this project; the amount of thought and consideration for its consumers and the environment puts Seventh Generation on a different level for sustainable packaging.”
Disruptive innovation is underway in higher education. While many will benefit, gaining access to personalized education at lower cost, some institutions will suffer if they fail to change now. Insights into the innovations coming to the university of the future is found in The Innovative University: Changing the DNA of Higher Education from the Inside…
During the CoDev 2011 conference in Scottsdale, Arizona, I was impressed with a speech given by a local CEO, John (“Jay”) Rogers of Local Motors in Chandler, Arizona. This small company designs exciting new vehicles using design contests that are open to the public. “Crowdsourcing” is one of the trendy new approaches to innovation, but…
Stoking Your Innovation Bonfire by Braden Kelley (John Wiley & Sons, 2010) is a highly readable, helpful book about the practical side of innovation, including guidance on building a culture and processes that support innovation in a corporation. Braden Kelley writes with the benefit of not only having many years of experience in supporting innovation,…
Every company has a unique story to tell about their innovation journey. As I’ve partnered with innovation trailblazers all around the world, I’ve been inspired by so many incredible, thought-provoking insights from those who have faced and overcome daunting challenges in their industries. That’s why I’m so excited about a brand new innovation convergence happening…
A few weeks ago I shared how innovative technology can now suck the smog out of the air in large, polluted cities. Speaking of green technology and air quality, a British Columbia company, Carbon Engineering, built the first air-capture CO2 demo plant. This technology works, and is now ready to be implemented on a…
Thanks to urban sprawl and auto & factory emissions, Milan is one of the most polluted cities in Italy. But Italian architect Stefano Boeri is greening up Milan with a “Vertical Forest.” The project took inspiration from traditional Italian towers covered in ivy. Boeri simply multiplied that effect on two soaring apartment towers. Can you…